Best Garage In Hellertown To Fix Your Audi’s Check Engine Light Issues

Best Garage In Hellertown To Fix Your Audi’s Check Engine Light Issues

Driving an Audi can be a delightful experience, however, this fun can turn into fright in a split second. One of the most alarming sights for any driver is the check engine light flashing on the dashboard. It is your car’s way of telling you that something has gone wrong within the vehicle. Before we look at ways you can diagnose a check engine light and some simple fixes you can use to clear its illumination, let’s quickly find out what the check engine light is.

The check engine light (CEL) is a part of your car’s onboard diagnostics system (OBD). When it lights up, it means the car’s computer has detected a problem with the engine or in the emissions system. A check engine light may not point to a specific problem when it comes on, therefore, it is important that you figure out what is going on yourself, with the help of a mechanic.

Common Reasons for Check Engine Light Illumination

The check engine light in your Audi can be turned on for many reasons and it all usually points to a problem that needs to be dealt with. Some of the reasons are the malfunctioning oxygen sensor that is very important for regulating the fuel mixture, the problems with the catalytic converter that reduces the harmful emissions, the faulty spark plugs or wires that cause misfires and poor performance, and the issues with the mass airflow sensor that affects the delivery of fuel. These problems that you may be facing can be solved immediately with effective diagnosis and repair to prevent the occurrence of more serious damage to your Audi.

Steps to Diagnose the Problem

  • Check the Gas Cap: The first thing you should do is check the gas cap. Most times, a loose or damaged gas cap can be the cause of the check engine light. Check that it is tight and in good condition. If it is loose, tighten it and check if the light goes off after a few drives. If the cap is broken, change it to a new one. A broken gas cap can lead to the fuel vapors leaking out, which in turn can affect the car’s emissions system.
  • Use an OBD-II Scanner: An OBD-II scanner can retrieve the diagnostic trouble codes (DTCs) that are stored on your car’s computer. These codes can assist in the detection of the issue. You can buy a scanner or go to a mechanic who can do the scan for you. The scanner connects to a port under the dashboard and gets the codes that identify the problem. This is a very important step since it provides you with the particular details of what might be the problem with your car.
  • Perform a Visual Inspection: Open the hood and look at the engine parts. Look for any obvious signs of damage, such as broken or corroded parts, loose wires, or leaks. The oxygen sensor, spark plugs, and wiring should not be forgotten. These are the common causes of the check engine light being on. Be on the lookout for anything that seems or feels odd or broken.
  • Consult a Professional: If you are not able to figure out or solve the problem by yourself, then it is time to ask a professional. A skilled technician will have the tools and knowledge to find and fix the problem in a precise way. They can analyze the DTCs and do more tests if required. They will also be able to use the detailed repair manuals and technical service bulletins which can give them the necessary information about the problems of your car model.

Audi Engine Inspection

Contact The Professional Audi Repair Shop In Hellertown

At JCL Automotive, our technicians are known as the most dependable experts in the Hellertown area when it comes to serving the most popular European cars and we offer 100% quality maintenance that makes sure you are always on the road with an Audi that you can trust. We have been doing a good job for Audi drivers in the area since 2005 and our service quality has not gone down till now.

If you have seen the annoying CEL on your Audi dashboard and you want to know why it has come on, you are in the right place. Our authorized mechanics will make sure that the problem is not only found but also repaired correctly. If you stay in Hellertown, PA, or the nearby cities, just call us on 484-851-3390 to reserve an appointment with our Audi experts.

Best Repair Shop In Hellertown To Fix Your BMW’s Engine Ticking Problems

Best Repair Shop In Hellertown To Fix Your BMW’s Engine Ticking Problems

Engine ticking is a sound that you get from the BMW engine, particularly when the car is at idle or when you are accelerating. This sound can range from a minor clicking sound to a louder ticking sound. It is usually described to be similar to the sound that is produced by a sewing machine.

This ticking noise can be somewhat alarming, but knowing why it occurs and when you should be concerned is crucial. Below is a guide to how you can handle BMW engine ticking issues.

What Causes Engine Ticking in BMWs?

  • Faulty Lifters: Valves are used in the engine and lifters assist in opening and closing of the valves. If they get damaged or become old they can produce a ticking sound. Lifters depend on the oil pressure to function effectively and when there is a slight variation, then you will hear this irritating noise.
  • Fuel Injectors: Your BMW fuel injectors can also cause a ticking sound. The injector usually gives a sound when it is running as it strives to inject fuel into the engine’s cylinders. However, if the ticking noise increases beyond the normal levels, it may be an indication of a problem such as the build-up of dirt or a faulty mechanism influencing the injectors.
  • Exhaust Leaks: An exhaust leak can cause a ticking sound especially when the engine is cold. This noise is usually because of a crack or hole in the exhaust manifold or because of a leak at the manifold gasket. The sound could decrease as the metal part warms up but that is not a solution to the problem because the leak has to be fixed.
  • Timing Chain Issues: Timing chain ensures that the valves and pistons of the engine are always moving in harmony. The chain might become loose or worn and cause a ticking sound.

Tips for Repairing Engine Ticking Problems

  • Top Off or Change the Oil: If the ticking noise is because of low oil then pouring oil to the right level can help to solve the problem. You should also make sure that the oil is changed if needed. Selecting the appropriate oil for your BMW is significant in the proper working of the engine and its durability. The type of oil to use and the time to change it depends on the vehicle owner’s manual.
  • Replace Hydraulic Lifters: In a case where worn or clogged lifters are the cause of the ticking noise, then the hydraulic lifters will have to be replaced. Hydraulic lifters are very important in ensuring that there is adequate clearance between the valves and the camshaft. If they fail, a noticeable ticking sound is produced by the vehicle’s engine. Replacing hydraulic lifters is often a complicated procedure that requires the dismantling of some of the engine components; so, it is always advisable to consult a professional mechanic to have the work done.
  • Repair or Replace the Timing Chain: If the timing chain is slippery or slack, then it may need to be adjusted or replaced. This is a major repair job that usually needs an auto mechanic.
  • Fix Exhaust Leaks: If you have diagnosed your BMW with an exhaust leak, then you can fix the exhaust manifold gasket or the manifold to eliminate the ticking sound. It has the potential to enhance the performance and efficiency of the engine as well as the overall performance of the vehicle.
  • Clean or Replace Fuel Injectors: If the sound being produced is from the fuel injectors, then it means it might be dirty and will require a cleaning or a replacement. Deposits in injectors can be removed with special injector cleaning fluids or by taking them to a reputable service provider.

BMW Timing Chain Repair

Find Out Why BMW Drivers Trust Us In Hellertown

If you are looking for an automotive shop that you can trust for your BMW, Audi, Mercedes, and Tesla repair in Hellertown, PA, then you should come to JCL Automotive. We are equipped with all the necessary tools to perform all services to the highest standard required in the automobile industry.

It is recommended that you take your BMW to a mechanic as soon as you hear any strange or loud sound. Prevention is better than cure, therefore early detection and repair will help avoid more severe problems later on. Give us a call today at 484-851-3390 for BMW inspection and repair.

* Man Driving BMW 7 Series Car image credit goes to: Alexandr Baranov.

Call Now!